If you’ve ever looked in your water heater and seen a thick sludge at the bottom, you know that sediment can cause all sorts of problems. Not only does it make your water heater work harder, but it can also clog your pipes and reduce water quality. Below are four ways to remove sediment from your water heater and keep it running smoothly.
1. Water Softener
A water softener is one of the most effective ways to remove sediment from your water heater. Softeners work by exchanging magnesium and calcium ions for sodium ions, preventing scale buildup on your pipes and appliances.
If you have hard water, a softener is a great way to prevent sediment from building up in your water heater. Softeners can be purchased at most home improvement stores, or you can rent one from a local water treatment company.
To use a softener, follow the manufacturer’s instructions. Most units need to be regenerated every few weeks, so check the manufacturer’s recommendations before purchasing a unit. Once a softener is installed, keep an eye on your water heater and drain it regularly to prevent sediment from building up.
In need of a softener in Pompano Beach? Coastal Energy Water and Air is a Rainsoft Water Treatment System Pompano Beach distributor, one of the best products in the market.
2. Water Heater Drain Valve
The water heater drain valve is located at the bottom of the unit and is used to drain the water out of the tank. To use the water heater, drain valve, open the valve, and allow the water to flow into a bucket or other container. Be sure to have a large enough container to catch all the water.
Once the water has been drained, close the valve and allow the unit to refill. Once it has finished refilling, turn on the power and let it heat up as usual.
If you notice that sediment is still building up in your water heater, you can try opening the drain valve slightly while the unit is running. This will help flush some of the sediment out of the tank. Water filter system in Pompano Beach can also help with this.
3. Water Heater Filter
Many water heaters come with a filter that can be used to remove sediment from the water. The filter is usually located near the inlet valve and is designed to catch sediment before entering the tank.
To use the filter, simply follow the manufacturer’s instructions. If you cannot find the filter in Pompano Beach, you can also contact an expert to do it for you. Coastal Energy Water and Air specialist will help look at your water filter system in Pompano Beach and leave your water heater as good as new.
4. Water Heater Flush Kit
You may need a flush kit if you have a lot of sediment in your water heater. Flush kits are available at most home improvement stores and come with everything you need to clean your water heater.
To use a flush kit, follow the instructions that come with the kit. Most kits require you to attach a hose to the drain valve and run it to a nearby sink or drain. Once the hose is attached, open the valve and allow the water to flow through the hose and into the drain.
After all the sediment has been flushed out, close the valve and remove the hose. Allow the unit to refill and turn on as usual.
Sediment can build up in your water heater over time, and it can cause a number of problems. Softeners, water heater drain valves, water heater filters, and flush kits are all great ways to remove sediment from your water heater and keep it running smoothly.
Coastal Energy Water and Air can look at your water heater and see if a water softener is a right solution for you. We also offer products like Rainsoft Water Treatment System Pompano Beach that can help reduce sediment in your water heater. Contact us today to learn more.
- June 14, 2022
- Water Filtration